メインコンテンツにスキップ

Dell XPS 12 9Q33 mSATA Card Replacement

必要な工具と部品

  1. Dell XPS 12 9Q33 mSATA Card Replacement, Removing the Battery: 手順 1、 1の画像 1
    • Slide the battery cable connector out of its system board socket.

    • Pull parallel to the motherboard, not straight up, or you will damage the socket.

    • Remove the screws that secure the battery to the palm-rest assembly.

    • Lift and remove the battery along with its cable.

    • Slide and hold the power switch for about five seconds to ground the system board.

  2. Dell XPS 12 9Q33 mSATA Card Replacement, Removing the mSATA card: 手順 2、 1の画像 1
    • Remove the screw that secures the mSATA card to the system board.

    • Slide and remove the mSATA card out of the mSATA-card connector.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Johnathan Hammond

メンバー登録日: 02/28/18

44,953 ポイント

408のガイドは作成済み

チーム

RampUP America, Inc. RampUP America, Inc.人のメンバー

Community

42 メンバー

1,989のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 11

今までの合計 380