メインコンテンツにスキップ

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

必要な工具と部品

  1. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 1、 3の画像 1 : 手順 1、 3の画像 2 : 手順 1、 3の画像 3
    • Use the Plastic Opening Tools to pry off the tab located on the right side of the top face plate.

  2. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 2、 1の画像 1
    • Lift the plate off the laptop from right to left.

    • Pull the plate out and remove it.

  3. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 3、 2の画像 1 : 手順 3、 2の画像 2
    • Remove the four 3mm Phillips #0 screws.

  4. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 4、 2の画像 1 : 手順 4、 2の画像 2
    • Grasp the laptop with both hands as shown.

    • Push the keyboard upwards with your thumbs to disconnect it.

  5. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 5、 2の画像 1 : 手順 5、 2の画像 2
    • Lift the keyboard from the laptop and remove it.

    • Ensure the connector is fully disconnected before lifting the keyboard out.

  6. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 6、 3の画像 1 : 手順 6、 3の画像 2 : 手順 6、 3の画像 3
    • Dislodge the RAM from its slot.

    • Push the retaining clips outward with your fingers.

  7. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 7、 3の画像 1 : 手順 7、 3の画像 2 : 手順 7、 3の画像 3
    • Pull the RAM chip up and out.

  8. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 8、 3の画像 1 : 手順 8、 3の画像 2 : 手順 8、 3の画像 3
    • Flip the laptop so under side is facing upwards.

    • Remove the 4.5mm Phillips #1 screw from the RAM cover.

    • Lift off the cover.

  9. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 9、 2の画像 1 : 手順 9、 2の画像 2
    • Dislodge the RAM from its slot by pushing outwards on the retaining clips.

  10. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 10、 3の画像 1 : 手順 10、 3の画像 2 : 手順 10、 3の画像 3
    • Lift the RAM chip up and out of the slot.

ゴール

2 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Nathan Valm

メンバー登録日: 03/20/18

735 ポイント

5のガイドは作成済み

チーム

UMass Dartmouth, Team S3-G1, Peak Spring 2018 UMass Dartmouth, Team S3-G1, Peak Spring 2018人のメンバー

UMASSD-PEAK-S18S3G1

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 6

過去 30 日: 14

今までの合計 1,026