メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Dell Venue 8 Speaker Replacement

必要な工具と部品

  1. Dell Venue 8 Speaker Replacement, Rear Case/Midframe: 手順 1、 1の画像 1
    • Hold the device with the screen facing up. Gently wedge your plastic opening tool into the crease, and run it along the perimeter of the case

    • You will hear click sounds as the clips unhinge

    • Remove the back panel of the device.

  2. Dell Venue 8 Speaker Replacement: 手順 2、 3の画像 1 Dell Venue 8 Speaker Replacement: 手順 2、 3の画像 2 Dell Venue 8 Speaker Replacement: 手順 2、 3の画像 3
    • Remove the 14 screws with the T-5 Torx screwdriver. (11 black 3.6mm screws, and three 4.45mm screws)

    • The silver screws are marked with an "S" or a sticker [S1.6(Silver)] See the corrected image

    • 4.45mm Silver screws

    • 3.6mm Black screws

    • Gently snap the perimeter clips open, and remove the internal plastic case.

  3. Dell Venue 8 Speaker Replacement, Speaker: 手順 3、 1の画像 1
    • Using your plastic opening tool, unclip the speaker connection from the logic board.

    • Caution: Pull directly up, not out, on the connection

  4. Dell Venue 8 Speaker Replacement: 手順 4、 1の画像 1
    • Remove the speaker by placing using your plastic opening tool in the gap on the top of the speaker and prying it up.

    • The speaker is held on by light adhesive

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Andrea

メンバー登録日: 02/19/15

1,071 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team 9-2, Leahy Winter 2015 USF Tampa, Team 9-2, Leahy Winter 2015人のメンバー

USFT-LEAHY-W15S9G2

3 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 685