メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

This replacement guide will show you how to replace the cover panel on your Dell VRP100 headset. With the right tools, this replacement is very simple, and is the basis to replacing many more components of your headset.

パーツ

パーツは指定されていません。

  1. Remove the black foam padding by peeling away slowly. Remove the front and back padding from the headset by peeling away slowly. Remove the front and back padding from the headset by peeling away slowly.
    • Remove the black foam padding by peeling away slowly.

    • Remove the front and back padding from the headset by peeling away slowly.

  2. Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.
    • Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.

    • Cover panel may need to be pushed in before inserting screws.

  3. Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing. Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing. Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.
    • Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.

  4. Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise. Carefully remove the lens and motherboard assembly from the white casing. Carefully remove the lens and motherboard assembly from the white casing.
    • Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.

    • Carefully remove the lens and motherboard assembly from the white casing.

終わりに

To reassemble your device, follow these instructions in reverse order.

Marco Salazar

メンバー登録日: 2018年10月08日

375 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team S17-G1, White Fall 2018 Cal Poly, Team S17-G1, White Fall 2018人のメンバー

CPSU-WHITE-F18S17G1

4 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 361