メインコンテンツにスキップ

Dell VRP100 Auxiliary Cord Replacement

必要な工具と部品

  1. Dell VRP100 Auxiliary Cord Replacement, Cover Panel: 手順 1、 3の画像 1 Dell VRP100 Auxiliary Cord Replacement, Cover Panel: 手順 1、 3の画像 2 Dell VRP100 Auxiliary Cord Replacement, Cover Panel: 手順 1、 3の画像 3
    • Remove the black foam padding by peeling away slowly.

    • Remove the front and back padding from the headset by peeling away slowly.

  2. Dell VRP100 Auxiliary Cord Replacement: 手順 2、 1の画像 1
    • Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.

    • Cover panel may need to be pushed in before inserting screws.

  3. Dell VRP100 Auxiliary Cord Replacement: 手順 3、 3の画像 1 Dell VRP100 Auxiliary Cord Replacement: 手順 3、 3の画像 2 Dell VRP100 Auxiliary Cord Replacement: 手順 3、 3の画像 3
    • Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.

  4. Dell VRP100 Auxiliary Cord Replacement: 手順 4、 3の画像 1 Dell VRP100 Auxiliary Cord Replacement: 手順 4、 3の画像 2 Dell VRP100 Auxiliary Cord Replacement: 手順 4、 3の画像 3
    • Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.

    • Carefully remove the lens and motherboard assembly from the white casing.

  5. Dell VRP100 Auxiliary Cord Replacement, Auxiliary Cord: 手順 5、 3の画像 1 Dell VRP100 Auxiliary Cord Replacement, Auxiliary Cord: 手順 5、 3の画像 2 Dell VRP100 Auxiliary Cord Replacement, Auxiliary Cord: 手順 5、 3の画像 3
    • Separate the external connector of the auxiliary cord.

    • A spudger may be needed to separate the connector.

  6. Dell VRP100 Auxiliary Cord Replacement: 手順 6、 2の画像 1 Dell VRP100 Auxiliary Cord Replacement: 手順 6、 2の画像 2
    • Remove the four 2.5mm PH000 screws by rotating counter-clockwise.

    • Separate the lens housing from the motherboard panel.

  7. Dell VRP100 Auxiliary Cord Replacement: 手順 7、 3の画像 1 Dell VRP100 Auxiliary Cord Replacement: 手順 7、 3の画像 2 Dell VRP100 Auxiliary Cord Replacement: 手順 7、 3の画像 3
    • In the top right corner of the motherboard panel, peel back the yellow tape covering the bundled auxiliary cable connector using tweezers.

    • Carefully pull out the bundled cable connectors.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Chris Grabow

メンバー登録日: 10/08/18

285 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team S17-G1, White Fall 2018 Cal Poly, Team S17-G1, White Fall 2018人のメンバー

CPSU-WHITE-F18S17G1

4 メンバー

12のガイドは作成済み

コメント 1 件

Hello, where i can buy the aux cable?

Domenico Rescigno - 返信

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 4

過去 30 日: 4

今までの合計 678