メインコンテンツにスキップ

Dell Studio 1435 Hard Drive Replacement

必要な工具と部品

  1. Dell Studio 1435 Hard Drive Replacement, Battery: 手順 1、 1の画像 1
    • Slide the battery release latch to the side.

    • Slide the battery out of the battery bay.

  2. Dell Studio 1435 Hard Drive Replacement, Base Cover: 手順 2、 1の画像 1
    • Loosen the seven captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.

  3. Dell Studio 1435 Hard Drive Replacement, Hard Drive: 手順 3、 1の画像 1
    • Remove the two screws on the hard drive assembly.

  4. Dell Studio 1435 Hard Drive Replacement: 手順 4、 1の画像 1
    • Pull the pull tab to disconnect the hard drive assembly from the system board connector.

    • Pull the interposer to detach it from the hard drive.

    • Remove the four screws (two on either side) to detach the hard drive cage from the hard drive.

    • Lift the hard drive cage off the hard drive.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Johnathan Hammond

メンバー登録日: 02/28/18

44,830 ポイント

408のガイドは作成済み

チーム

RampUP America, Inc. RampUP America, Inc.人のメンバー

Community

42 メンバー

1,985のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 343