メインコンテンツにスキップ

Dell Precision T3400 Power Supply Replacement

必要な工具と部品

  1. Dell Precision T3400 Power Supply Replacement, Disconnect the DC power cables from the system board and the drives.: 手順 1、 1の画像 1
    • Pay special attention to where the DC power cables are plugged in so that they can be replaced the same way.

    • You may need to remove the heat-sink assembly in order to detach certain cables.

  2. Dell Precision T3400 Power Supply Replacement, Remove the power supply from the computer case.: 手順 2、 1の画像 1
    • Remove the four screws on the back of the power supply using a standard Phillips-head screwdriver.

  3. Dell Precision T3400 Power Supply Replacement, Remove the power supply from the computer case.: 手順 3、 1の画像 1
    • Press the secure tab down and slide the power supply out of its bracket to remove it.

  4. Dell Precision T3400 Power Supply Replacement, Install the new power supply.: 手順 4、 1の画像 1
    • Slide the power supply into the empty bracket. It will click into place.

    • Replace the four screws to secure the power supply to the computer case.

  5. Dell Precision T3400 Power Supply Replacement, Reconnect the DC power cables.: 手順 5、 1の画像 1
    • Remember to use the case's secure tabs to hold cables out of the way.

    • If you removed the heat-sink assembly in order to remove any power supply cables, be sure to re-install the assembly.

終わりに

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

作成者

6人の作成者と共同で作成されました。

Josette Cormier

メンバー登録日: 09/10/13

13 ポイント

2のガイドは作成済み

チーム

UMass Dartmouth, Team 1-2, Gulbrandsen Fall 2013 UMass Dartmouth, Team 1-2, Gulbrandsen Fall 2013人のメンバー

UMASSD-GULBRANDSEN-F13S1G2

3 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 13

今までの合計 8,102