メインコンテンツにスキップ

ツール

ツールは指定されていません。

  1. Power down your PC and remove the power cord from the back. Power down your PC and remove the power cord from the back.
    • Power down your PC and remove the power cord from the back.

  2. Press and hold the power button for about 10 seconds, then release. This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.
    • Press and hold the power button for about 10 seconds, then release.

    • This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.

  3. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  4. With the computer standing upright, firmly pull on the tab at the back of the computer.
    • With the computer standing upright, firmly pull on the tab at the back of the computer.

    • When the side panel pops free, gently pull the panel away from the computer.

    • If you have trouble freeing the side panel from the case, you may need to pull the tab a bit harder.

  5. Remove the power and SATA data cables. SATA power SATA data
    • Remove the power and SATA data cables.

    • SATA power

    • SATA data

  6. Pull the two tabs on the hard drive and pull up Pull the two tabs on the hard drive and pull up Pull the two tabs on the hard drive and pull up
    • Pull the two tabs on the hard drive and pull up

  7. Now take the tray off of the hard drive. Now take the tray off of the hard drive. Now take the tray off of the hard drive.
    • Now take the tray off of the hard drive.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Padraic Hoselton

メンバー登録日: 2017年08月22日

3,029 ポイント

13のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

287 メンバー

819のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 40

今までの合計 719