メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

  1. Power down your PC and remove the power cord from the back. Power down your PC and remove the power cord from the back.
    • Power down your PC and remove the power cord from the back.

  2. Press and hold the power button for about 10 seconds, then release. This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.
    • Press and hold the power button for about 10 seconds, then release.

    • This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.

  3. With the computer standing upright, firmly pull on the tab at the back of the computer.
    • With the computer standing upright, firmly pull on the tab at the back of the computer.

    • When the side panel pops free, gently pull the panel away from the computer.

    • If you have trouble freeing the side panel from the case, you may need to pull the tab a bit harder.

  4. Unplug your hard drives power and data cables. Unplug your hard drives power and data cables. Unplug your hard drives power and data cables.
    • Unplug your hard drives power and data cables.

  5. Manta Driver Kit

    どんな修理にでも対応可能な112ビット

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  6. Unplug the power and data cables. Unplug the power and data cables. Unplug the power and data cables.
    • Unplug the power and data cables.

  7. Unplug the fan. Unplug the fan.
    • Unplug the fan.

  8. Remove the two Phillips #2 screws. Remove the two Phillips #2 screws.
    • Remove the two Phillips #2 screws.

  9. Pull the heat sink up. Pull the heat sink up. Pull the heat sink up.
    • Pull the heat sink up.

  10. Pull the two tabs and pull it out. This needs a lot of force to take it off. This needs a lot of force to take it off.
    • Pull the two tabs and pull it out.

    • This needs a lot of force to take it off.

  11. To take the fan out you have to pull the two tabs and pull the fan out. To take the fan out you have to pull the two tabs and pull the fan out. To take the fan out you have to pull the two tabs and pull the fan out.
    • To take the fan out you have to pull the two tabs and pull the fan out.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Padraic Hoselton

メンバー登録日: 2017年08月22日

3,378 ポイント

13のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

293 メンバー

929のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 15

今までの合計 1,041