パーツ

パーツは必要ありません。

  1. Make sure the Dell Latitude X300 power is off.
    • Make sure the Dell Latitude X300 power is off.

    • Remove the battery located on the bottom of the device by pushing in both clips.

  2. Remove rubber caps on each corner of the front screen with a pinch. Remove the 4 mm screws located on the front screen of the laptop.
    • Remove rubber caps on each corner of the front screen with a pinch.

    • Remove the 4 mm screws located on the front screen of the laptop.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Carefully, remove the screen casing using either your hands or a proper tool.
    • Carefully, remove the screen casing using either your hands or a proper tool.

    • The casing is very flimsy, so extreme care is required.

  5. Remove the 4 mm screws on the bottom left and bottom right corner of the screen.
    • Remove the 4 mm screws on the bottom left and bottom right corner of the screen.

  6. Carefully lift the screen and place it on it's face. Disconnect the wiring attached to the screen.
    • Carefully lift the screen and place it on it's face.

    • Disconnect the wiring attached to the screen.

    • It is important not to damage this wire.

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Jacob

メンバー登録日: 2014年03月12日

9 ポイント

2のガイドは作成済み

チーム

University of Maryland, Team 6-1, Vijaybhaskar Spring 2014 University of Maryland, Team 6-1, Vijaybhaskar Spring 2014人のメンバー

UMD-VIJAYBHASKAR-S14S6G1

4 メンバー

2のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 492