メインコンテンツにスキップ

はじめに

This guide will walk users through replacing the Dell Latitude E6530 Hard Drive Port. Refer to the troubleshooting page before begining replacement in order to clarify and identify the problem.

パーツ

パーツは指定されていません。

  1. Flip the computer over so that the bottom panel is facing you.
    • Flip the computer over so that the bottom panel is facing you.

  2. Slide the switches away from each other to release the battery. Slide the switches away from each other to release the battery.
    • Slide the switches away from each other to release the battery.

  3. Using your hands, gently remove the battery from the device. Using your hands, gently remove the battery from the device.
    • Using your hands, gently remove the battery from the device.

  4. Using a Phillips #00 screwdriver, unscrew the two screws. Using a Phillips #00 screwdriver, unscrew the two screws.
    • Using a Phillips #00 screwdriver, unscrew the two screws.

  5. Gently remove the hard drive. Gently remove the hard drive.
    • Gently remove the hard drive.

  6. Undo the Phillips #1 screw keeping the drive in the bracket.
    • Undo the Phillips #1 screw keeping the drive in the bracket.

  7. Remove the drive from the bracket,
    • Remove the drive from the bracket,

終わりに

To reassemble your device, follow these instructions in reverse order. Refer to the troubleshooting guide and additional links for more information if issue persists.

Amelia Jochem

メンバー登録日: 2020年01月16日

220 ポイント

2のガイドは作成済み

コメント1件

There’s a missing step here. There’s another screw you’re supposed to undo to remove the drive.

Jonathan M. - 返信

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 6

今までの合計 163