メインコンテンツにスキップ

はじめに

This guide will show you how to replace a screen on the Dell Latitude E5410.

  1. Have your laptop ready with your screen pulled all they way down parallel to the bottom of the laptop.
    • Have your laptop ready with your screen pulled all they way down parallel to the bottom of the laptop.

  2. Start on the top left or right corner of the screen edge and unscrew the small screws.
    • Start on the top left or right corner of the screen edge and unscrew the small screws.

    • Be sure to remove the rubber placeholders in order to access the screws.

  3. Using a plastic opening tool, pry the bezel away from the screen. Using a plastic opening tool, pry the bezel away from the screen.
    • Using a plastic opening tool, pry the bezel away from the screen.

  4. Use the Phillips screwdriver to remove the screws from corners around the screen. Use the Phillips screwdriver to remove the screws from corners around the screen.
    • Use the Phillips screwdriver to remove the screws from corners around the screen.

  5. Remove the screws from both sides.
    • Remove the screws from both sides.

    • Once removed, they will release the screen.

  6. Use the spudger to move the sensor aside. Use the spudger to move the sensor aside.
    • Use the spudger to move the sensor aside.

  7. Release the screen by pulling up and out. Release the screen by pulling up and out.
    • Release the screen by pulling up and out.

終わりに

To reassemble your device, follow these instructions in reverse order.

Darby

メンバー登録日: 2016年09月29日

101 ポイント

1ガイドが承認済み

チーム

Eastern Washington University, Team 1-6, Crane Fall 2016 Eastern Washington University, Team 1-6, Crane Fall 2016人のメンバー

EWU-CRANE-F16S1G6

4 メンバー

3のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 11

過去 30 日: 36

今までの合計 1,858