はじめに

Is your laptop out of storage or not reading files correctly? Consider using this guide to replace the hard drive of your laptop.

パーツ

パーツは必要ありません。

  1. Open the laptop and remove the small panel located above the keyboard.
    • Open the laptop and remove the small panel located above the keyboard.

  2. Using a Phillips 1 Screwdriver, unscrew the three M2x3-mm screws located above the keyboard where the small panel was originally.
    • Using a Phillips 1 Screwdriver, unscrew the three M2x3-mm screws located above the keyboard where the small panel was originally.

  3. Pull off keyboard forward and then outwards.
    • Pull off keyboard forward and then outwards.

    • The keyboard is fragile, so make sure you pull the keyboard off carefully.

  4. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  5. With your Phillips 1 screwdriver, unscrew the five M2.5x5-mm screws and the five M2.5x8-mm screws that lie underneath the keyboard panel.
    • With your Phillips 1 screwdriver, unscrew the five M2.5x5-mm screws and the five M2.5x8-mm screws that lie underneath the keyboard panel.

  6. Remove additional wires located within the panel. For the smaller wires, try using a spudger for easier access.
    • Remove additional wires located within the panel.

    • For the smaller wires, try using a spudger for easier access.

  7. Lift the keyboard panel to separate the component from the rest of the device.
    • Lift the keyboard panel to separate the component from the rest of the device.

  8. Unscrew the three screws located on the top of the component. Lift the hard drive out of its holding in an outward motion and remove it from the device.
    • Unscrew the three screws located on the top of the component.

    • Lift the hard drive out of its holding in an outward motion and remove it from the device.

まとめ

To reassemble your device, follow these instructions in reverse order.

Ryan Blakey

メンバー登録日: 2018年09月24日

172 ポイント

2のガイドは作成済み

チーム

University of North Texas, Team S6-G5, Thompson Fall 2018 University of North Texas, Team S6-G5, Thompson Fall 2018人のメンバー

UNT-THOMPSON-F18S6G5

4 メンバー

5のガイドは作成済み

コメント1件

What!?! You can simple remove the hard drive by undoing two screws on the bottom of the laptop. Then you can remove the bezel from the laptop by undoing one more screw. It’s detailed in the service manual on the Dell website.

Rob Walter - 返信

統計データを表示:

過去 24時間: 1

過去 7 日: 9

過去 30 日: 18

今までの合計 75