メニュー

あなたの設定

Dell Latitude D610 Keyboard Replacement

作成者： Jordan Barham (そして 3 人のその他投稿者)
  • コメント: 0
  • お気に入り: 2
  • 完了: 2

難易度

簡単

手順

7

所要時間

5 - 10 分

セクション

2

フラグ

0

はじめに

Replacing a defective keyboard is a fairly simple and easy task, requiring little tools and prior knowledge.

  1. Remove the 3.9 mm Phillips #1 screw from the battery compartment. Remove the 3.9 mm Phillips #1 screw from the battery compartment.

    • Remove the 3.9 mm Phillips #1 screw from the battery compartment.

    翻訳

  2. Locate the laptop battery release button lock Push the battery release in the direction of the arrow, and pull upward. Push the battery release in the direction of the arrow, and pull upward.

    • Locate the laptop battery release button lock

    • Push the battery release in the direction of the arrow, and pull upward.

    翻訳

  3. Remove the battery from its compartment.

    • Remove the battery from its compartment.

    翻訳

  5. Use an opening tool or flat tool to remove the plastic cover above the keyboard. Use an opening tool or flat tool to remove the plastic cover above the keyboard. Use an opening tool or flat tool to remove the plastic cover above the keyboard.

    • Use an opening tool or flat tool to remove the plastic cover above the keyboard.

    翻訳

  6. Remove the two 3.9mm Philips #1 screws that are holding the keyboard in place. Remove the two 3.9mm Philips #1 screws that are holding the keyboard in place.

    • Remove the two 3.9mm Philips #1 screws that are holding the keyboard in place.

    翻訳

  7. Using an opening tool, carefully release the keyboard from the case. Making sure not to tear or damage the wires still connecting it to the laptop.

    • Using an opening tool, carefully release the keyboard from the case.

    • Making sure not to tear or damage the wires still connecting it to the laptop.

    翻訳

  8. Carfully lift the key board. Lift only about 3 - 4 inches so that the wires holding the keyboard do not get damaged. Pull on the blue tab to unplug the keyboard.

    • Carfully lift the key board.

    • Lift only about 3 - 4 inches so that the wires holding the keyboard do not get damaged.

    • Pull on the blue tab to unplug the keyboard.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

3他の投稿者と一緒に

Jordan Barham

メンバー登録日: 2014年01月26日

402 ポイント

3のガイドは作成済み

バッジ: 7

+4 個以上のバッジ

チーム

Cal Poly, Team 6-24, Maness Winter 2014 Cal Poly, Team 6-24, Maness Winter 2014人のメンバー

CPSU-MANESS-W14S6G24

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 12

今までの合計 1,506