メインコンテンツにスキップ

はじめに

The RAM is essential for a computer to function, and must be replaced if is found to be faulty.

パーツ

パーツは指定されていません。

  1. Flip the laptop so that the battery is facing up, and the Dell logo is facing down on the surface the laptop is placed on. Flip the laptop so that the battery is facing up, and the Dell logo is facing down on the surface the laptop is placed on. Flip the laptop so that the battery is facing up, and the Dell logo is facing down on the surface the laptop is placed on.
    • Flip the laptop so that the battery is facing up, and the Dell logo is facing down on the surface the laptop is placed on.

  2. Use a Phillips #00 screwdriver to remove the 3 screws that hold the L-shaped back panel down.
    • Use a Phillips #00 screwdriver to remove the 3 screws that hold the L-shaped back panel down.

  3. Lift the L-shaped panel by the corners, and set it to the side.
    • Lift the L-shaped panel by the corners, and set it to the side.

  4. Pull on the outside tabs keeping the RAM stick in place. The RAM should then pop out and can be easily removed by pulling away from the slot.
    • Pull on the outside tabs keeping the RAM stick in place.

    • The RAM should then pop out and can be easily removed by pulling away from the slot.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Parker Wiley

メンバー登録日: 2018年06月21日

382 ポイント

3のガイドは作成済み

チーム

University of North Texas, Team S2-G1, Riccardelli Fall 2018 University of North Texas, Team S2-G1, Riccardelli Fall 2018人のメンバー

UNT-RICCARDELLI-F18S2G1

3 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 162