Dell Latitude 9410 2-in-1 Display Replacement

はじめに

Use this guide to replace the display of the Dell Latitude 9410 2-in-1. Screen abnormalities such as flickering, horizontal or vertical lines, or color fades may indicate a faulty display.

必要な工具と部品

手順1 Base Panel

Dell Latitude 9410 2-in-1 Display Replacement, Base Panel: 手順 1、 1の画像 1

Ensure that the laptop is unplugged and powered off before beginning.
Place the laptop upside down on a flat surface.

編集

手順2

Use a Phillips #00 screwdriver to loosen the ten captive screws.
The screws are permanently fastened to the base panel; do not attempt to remove them.

編集

手順3

Dell Latitude 9410 2-in-1 Display Replacement: 手順 3、 3の画像 3

Carefully lift off the back panel.

編集

手順4 Battery

Dell Latitude 9410 2-in-1 Display Replacement, Battery: 手順 4、 2の画像 1

Dell Latitude 9410 2-in-1 Display Replacement, Battery: 手順 4、 2の画像 2

Use a Philips #00 screwdriver to remove the five 3mm screws that secure the battery.

編集

手順5

Dell Latitude 9410 2-in-1 Display Replacement: 手順 5、 3の画像 3

Use a Philips #00 screwdriver to remove one 4.5 mm screw.

編集

手順6

Grip the battery cable near the plug and pull it straight out, in the direction of the cable.

編集

手順7

この手順で使用する道具：

Tweezers

$4.99

購入する

Use tweezers to gently move the speaker ribbon cable away from the bottom of the battery.
The ribbon cable is thin and fragile; handle it carefully.
The ribbon cable only needs to be moved so that the battery can be removed; do not completely remove the ribbon cable.

編集

手順8

Lift the battery out with two hands.

編集

手順9 Display

Dell Latitude 9410 2-in-1 Display Replacement, Display: 手順 9、 3の画像 1

Dell Latitude 9410 2-in-1 Display Replacement, Display: 手順 9、 3の画像 2

Dell Latitude 9410 2-in-1 Display Replacement, Display: 手順 9、 3の画像 3

Carefully detach the ribbon that is affixed to the HDD.
Using a Philips #00 screwdriver, unscrew the 3, top left and top right 4mm screws located about the hinge.

編集