メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Dell Inspiron 9300 Prerequisite Only Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. Dell Inspiron 9300 Prerequisite Only  Replacement, Prerequisite Only: 手順 1、 2の画像 1 Dell Inspiron 9300 Prerequisite Only  Replacement, Prerequisite Only: 手順 1、 2の画像 2
    • Remove the battery prior to working on any internal components.

    • Remove the twelve 6mm Phillips screws from the bottom of the case.

    • Remove the battery before working on internal components to ensure a safe working environment.

  2. Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 2、 1の画像 1
    • Gently pry away the silver bezel above the keyboard and below the display using a spudger.

    • Start on the right hand side, where there is a notch in the bezel for easiest removal.

  3. Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 3、 3の画像 1 Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 3、 3の画像 2 Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 3、 3の画像 3
    • Remove the two 5mm Phillips screws retaining the keyboard.

    • Pull the keyboard up and toward the monitor to reveal the ribbon cable beneath.

    • Firmly grasp the blue tape attached to the keyboard ribbon cable connector and pull upward away from the motherboard.

  4. Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 4、 2の画像 1 Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 4、 2の画像 2
    • Firmly grasp the blue tape attached to the LCD display ribbon cable connector and pull upward away from the motherboard.

    • Remove the two 5mm Phillips screws holding the display hinge on both sides of the laptop.

    • Support the display as you loosen the hinges, to avoid the screen falling and breaking.

  5. Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 5、 2の画像 1 Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 5、 2の画像 2
    • Remove the seven 6mm Phillips screws holding the trackpad/palm rest to the motherboard.

    • Gently pry the CMOS battery out of its retaining clip using a spudger.

  6. Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 6、 2の画像 1 Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 6、 2の画像 2
    • Remove the low profile connector for the keyboard status lights located next to the video card heat sink using a spudger.

    • Remove the trackpad ribbon cable from the motherboard using a spudger.

  7. Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 7、 2の画像 1 Dell Inspiron 9300 Prerequisite Only  Replacement: 手順 7、 2の画像 2
    • Pull up and away on the track pad to expose the internal components below.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Steven Faulkner

メンバー登録日: 09/26/16

214 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 16-6, Eyestone Fall 2016 USF Tampa, Team 16-6, Eyestone Fall 2016人のメンバー

USFT-EYESTONE-F16S16G6

5 メンバー

11のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 52