はじめに

This guide requires a Phillips #00 screwdriver

パーツ

パーツは必要ありません。

Unplug the laptop from the power adapter and turn the power off. Failure to unplug laptop before proceeding could result in risk of electric shock! Failure to unplug laptop before proceeding could result in risk of electric shock!
  • Unplug the laptop from the power adapter and turn the power off.

  • Failure to unplug laptop before proceeding could result in risk of electric shock!

コメントを追加する

Slide the battery-lock tab and hold. Flip the battery away from the chassis to remove it. Flip the battery away from the chassis to remove it.
  • Slide the battery-lock tab and hold.

  • Flip the battery away from the chassis to remove it.

コメントを追加する

Undo the screw on the Mini-PCI card cover labeled "C" This screw will remain within the panel
  • Undo the screw on the Mini-PCI card cover labeled "C"

  • This screw will remain within the panel

  • Remove the panel from the chassis.

コメントを追加する

Disconnect the antenna cables from the Mini-PCI card.
  • Disconnect the antenna cables from the Mini-PCI card.

コメントを追加する

Use your fingertips to carefully spread apart the white plastic tabs. Flip the Mini-PCI card up at a 45 degree angle. Remove the card from the computer by sliding out diagonally
  • Use your fingertips to carefully spread apart the white plastic tabs.

  • Flip the Mini-PCI card up at a 45 degree angle.

  • Remove the card from the computer by sliding out diagonally

  • Ground yourself while dealing with the card. Static shock can cause damage to the card. Store the card in anti-static bag when not in use.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

charlierefvem

メンバー登録日: 2011年01月11日

854 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 13-2, Forte Winter 2011 Cal Poly, Team 13-2, Forte Winter 2011人のメンバー

CPSU-FORTE-W11S13G2

5 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 9

今までの合計 3,964