メインコンテンツにスキップ

はじめに

Use this guide to remove the back panel in order to access internal components or replace the panel.

パーツ

パーツは指定されていません。

  1. Ensure the device is powered off and unplugged. Close the device and orient it face up, with the hinges further away from you. Flip the device over so the backside is facing you.
    • Ensure the device is powered off and unplugged. Close the device and orient it face up, with the hinges further away from you.

    • Flip the device over so the backside is facing you.

  2. PCラップトップ用バッテリー

    iFixitの品質保証付きトップPCブランド用バッテリー

    ショップを見る

    PCラップトップ用バッテリー

    iFixitの品質保証付きトップPCブランド用バッテリー

    ショップを見る
  3. Using the Phillips #1 screwdriver, remove all nine 7mm screws.
    • Using the Phillips #1 screwdriver, remove all nine 7mm screws.

  4. Using the plastic opening tool, pull the back panel upward. Move the opening tool along the edge of the device and lift the panel off of your device. Be aware, the back panel is kept in place by magnetic clips. They will offer some resistance, but continue to gently leverage upwards.
    • Using the plastic opening tool, pull the back panel upward. Move the opening tool along the edge of the device and lift the panel off of your device.

    • Be aware, the back panel is kept in place by magnetic clips. They will offer some resistance, but continue to gently leverage upwards.

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Christopher Gravelle

メンバー登録日: 2018年10月23日

812 ポイント

7のガイドは作成済み

チーム

UMass Dartmouth, Team S1-G2, Simcock Fall 2018 UMass Dartmouth, Team S1-G2, Simcock Fall 2018人のメンバー

UMASSD-SIMCOCK-F18S1G2

3 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 61