はじめに

This guide will most likely be utilized if one of the RAM modules becomes corrupted or you wish to upgrade to a higher amount of RAM if applicable.

パーツ

パーツは必要ありません。

Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.
  • Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.

  • Turn the laptop over to its back.

コメントを追加する

Slide the release latch while simultaneously pulling backwards on the battery.
  • Slide the release latch while simultaneously pulling backwards on the battery.

コメントを追加する

Slide the battery out of the battery bay.
  • Slide the battery out of the battery bay.

コメントを追加する

Unscrew the four screws (3mm Phillips #1) that hold the base cover in place.
  • Unscrew the four screws (3mm Phillips #1) that hold the base cover in place.

  • The screws are connected to the base cover by a washer anddo not remove from the base cover.

コメントを追加する

Carefully lift the base cover vertically away from the laptop. Carefully lift the base cover vertically away from the laptop.
  • Carefully lift the base cover vertically away from the laptop.

コメントを追加する

Spread apart the securing clips on each end of the memory stick until the memory stick pops up.
  • Spread apart the securing clips on each end of the memory stick until the memory stick pops up.

  • Remove the memory stick from the laptop.

  • Repeat these steps to remove the second memory stick.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

8 の人々がこのガイドを完成させました。

Nathan Lemay

メンバー登録日: 2014年04月16日

2,491 ポイント

15のガイドは作成済み

チーム

Cal Poly, Team 9-14, Regan Spring 2014 Cal Poly, Team 9-14, Regan Spring 2014人のメンバー

CPSU-REGAN-S14S9G14

4 メンバー

15のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 6

過去 30 日: 27

今までの合計 1,259