メインコンテンツにスキップ

はじめに

In this guide, we will be showing you how to remove and replace the Hard Drive.

パーツ

パーツは指定されていません。

  1. Follow the procedures in Before You Begin.
    • Follow the procedures in Before You Begin.

    • Turn the computer over and remove the two hard drive screws.

  2. Slide the hard drive out of the computer.
    • Slide the hard drive out of the computer.

  3. Remove the two screws (one from each side of the hard drive cover), then pull to separate the cover from the hard drive. Remove the two screws (one from each side of the hard drive cover), then pull to separate the cover from the hard drive.
    • Remove the two screws (one from each side of the hard drive cover), then pull to separate the cover from the hard drive.

  4. Replace the hard drive cover and tighten the two screws to secure the cover to the NEW hard drive. Replace the hard drive cover and tighten the two screws to secure the cover to the NEW hard drive.
    • Replace the hard drive cover and tighten the two screws to secure the cover to the NEW hard drive.

  5. NOTICE: Use firm and even pressure to slide the hard drive into place. Excessive force may result in damage to the connector.
    • NOTICE: Use firm and even pressure to slide the hard drive into place. Excessive force may result in damage to the connector.

    • Slide the hard drive into the hard drive bay until the drive is fully seated.

  6. Replace the two screws to secure the hard drive.
    • Replace the two screws to secure the hard drive.

ゴール

Terrence15

メンバー登録日: 2017年12月18日

73,105 ポイント

442のガイドは作成済み

チーム

Informative Technologies Inc. Informative Technologies Inc.人のメンバー

Community

38 メンバー

1,990のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 77