はじめに

Because the model device does not have a hard drive, this is not a replacement guide, but merely a prerequisite guide for other removal guides.

パーツ

パーツは必要ありません。

  1. Make sure the display is closed. Then, flip the computer over so that you can see the bottom cover.
    • Make sure the display is closed. Then, flip the computer over so that you can see the bottom cover.

    • Loosen the two 5 mm Phillips #0 on the upper edge of the cover.

      • These screws will stay captive to the case.

    コメントを追加する

  2. Remove the two 5 mm interior screws that connect the cover to the assembly using the same Philips head screwdriver from the previous step.
    • Remove the two 5 mm interior screws that connect the cover to the assembly using the same Philips head screwdriver from the previous step.

    コメントを追加する

    • Use a spudger to remove the base cover from the rest of bottom cover.

    As it is not clearly visible in the picture: You should start to open the base cover at the screen side, to avoid breaking the plastic guides of the base cover. A flat dough scraper is a pretty good tool for that.

    David Jatzke - 返信

  3. コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

Jean Whitmore

メンバー登録日: 2015年01月22日

920 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 18-2, Maness Winter 2015 Cal Poly, Team 18-2, Maness Winter 2015人のメンバー

CPSU-MANESS-W15S18G2

4 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 12

過去 30 日: 50

今までの合計 5,401