メインコンテンツにスキップ

はじめに

In this guide, we will show you how to remove and replace the Hard Drive.

パーツ

パーツは指定されていません。

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Remove the two screws that secure the hard-drive assembly to the computer base.

  2. Slide the hard-drive assembly out of the hard-drive compartment.
    • Slide the hard-drive assembly out of the hard-drive compartment.

  3. Remove the two screws that secure the hard-drive bezel to the hard drive.
    • Remove the two screws that secure the hard-drive bezel to the hard drive.

  4. Pull the hard-drive bezel away from the hard drive.
    • Pull the hard-drive bezel away from the hard drive.

  5. Align the screw holes on the NEW hard-drive bezel with the screw holes on the hard drive and replace the two screws.
    • Align the screw holes on the NEW hard-drive bezel with the screw holes on the hard drive and replace the two screws.

  6. Slide the hard-drive assembly into the hard-drive compartment until it is fully seated.
    • Slide the hard-drive assembly into the hard-drive compartment until it is fully seated.

  7. Replace the two screws that secure the hard-drive assembly to the computer base.
    • Replace the two screws that secure the hard-drive assembly to the computer base.

ゴール

ある他の人がこのガイドを完成しました。

Terrence15

メンバー登録日: 2017年12月18日

71,356 ポイント

442のガイドは作成済み

チーム

Informative Technologies Inc. Informative Technologies Inc.人のメンバー

Community

15 メンバー

926のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 13

今までの合計 268