メインコンテンツにスキップ

はじめに

In this guide, we will be showing you how to remove and replace the Display Assembly.

パーツ

パーツは指定されていません。

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Disconnect the display cable from the connector on the system board.

  2. Remove the two screws (one on each side) that secure the display assembly to the computer base.
    • Remove the two screws (one on each side) that secure the display assembly to the computer base.

  3. Lift and remove the display assembly out of the computer base.
    • Lift and remove the display assembly out of the computer base.

  4. Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.
    • Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.

  5. Connect the display cable to the connector on the system board.
    • Connect the display cable to the connector on the system board.

ゴール

Terrence15

メンバー登録日: 2017年12月18日

71,356 ポイント

442のガイドは作成済み

チーム

Informative Technologies Inc. Informative Technologies Inc.人のメンバー

Community

15 メンバー

926のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 7

今までの合計 99