メインコンテンツにスキップ

はじめに

In this guide, we will be removing and replacing the memory module on the Dell Alienware 13 R2.

  1. WARNING: Before working inside your computer, read the  safety information that shipped with your computer and  follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Using your fingertips, carefully spread apart the securing clips on each end of the memory-module slot until the memory module pops up.

  2. Slide and remove the memory module from the memory-module slot.
    • Slide and remove the memory module from the memory-module slot.

  3. Using the new memory module, align the notch on the memory module with the tab on the memory-module slot.
    • Using the new memory module, align the notch on the memory module with the tab on the memory-module slot.

  4. Slide the memory module firmly into the slot at an angle and press the  memory module down until it clicks into place. Slide the memory module firmly into the slot at an angle and press the  memory module down until it clicks into place.
    • Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.

まとめ

To reassemble your device, follow these instructions in reverse order.

Terrence15

メンバー登録日: 2017年12月18日

71,356 ポイント

442のガイドは作成済み

チーム

Informative Technologies Inc. Informative Technologies Inc.人のメンバー

Community

15 メンバー

926のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 34