メインコンテンツにスキップ

DeWalt DCS380 Blade Shaft Replacement

必要な工具と部品

  1. DeWalt DCS380 Blade Shaft Replacement, Removing shoe and boot.: 手順 1、 1の画像 1
    • Remove the battery before disassembly.

    • Remove the shoe by pressing the yellow button on the left side of the hand grip.

  2. DeWalt DCS380 Blade Shaft Replacement: 手順 2、 2の画像 1 DeWalt DCS380 Blade Shaft Replacement: 手順 2、 2の画像 2
    • Remove the two M8x18mm T20 bolts from the front plate.

  3. DeWalt DCS380 Blade Shaft Replacement: 手順 3、 1の画像 1
    • Pull the front of the grip while holding the saw body in place.

  4. DeWalt DCS380 Blade Shaft Replacement, Blade Shaft: 手順 4、 2の画像 1 DeWalt DCS380 Blade Shaft Replacement, Blade Shaft: 手順 4、 2の画像 2
    • Remove the four M8x18mm T20 screws on the top of the gearbox.

    • Pull the top of the gearbox off and set the saw body aside.

  5. DeWalt DCS380 Blade Shaft Replacement: 手順 5、 2の画像 1 DeWalt DCS380 Blade Shaft Replacement: 手順 5、 2の画像 2
    • Remove the black plastic dust covers using the plastic pry bar.

    • Remove the two M5 lock nuts using a 5/16" socket.

  6. DeWalt DCS380 Blade Shaft Replacement: 手順 6、 2の画像 1 DeWalt DCS380 Blade Shaft Replacement: 手順 6、 2の画像 2
    • Turn the housing over and remove the two countersunk M5x17mm T20 bolts from the shaft yoke.

    • Remove the yoke.

  7. DeWalt DCS380 Blade Shaft Replacement: 手順 7、 2の画像 1 DeWalt DCS380 Blade Shaft Replacement: 手順 7、 2の画像 2
    • Pull the shaft out of the front of the housing.

    • Leave the shaft saddle in place over the holes in the cover.

    • Re-grease before re-assembly. If there are metal shavings or pieces of the broken shaft left in the gearbox make sure to remove them before re-greasing.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Jonathan Hicks

メンバー登録日: 01/17/19

725 ポイント

7のガイドは作成済み

チーム

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 9

今までの合計 836