DJI Mavic Air 2 Motherboard Replacement

はじめに

Hi everyone, in this guide, I'll show you how to replace the motherboard on the DJI Mavic Air 2 drone.

After replacing the motherboard, you will need to calibrate your drone. Some calibration processes can be done with the DJI Fly mobile app, but for some processes, like camera gimbal calibration, you will need to use additional software.

How to calibrate the gimbal on DJI Mavic Air 2 watch this video tutorial https://youtu.be/mu03HWXplM4

必要な工具と部品

ビデオの概要

手順1 Motherboard

DJI Mavic Air 2 Motherboard Replacement, Motherboard: 手順 1、 1の画像 1

Remove the six screws on the skid plate using a H1.5 Allen Bit.

編集

手順2

Using the iFixIt Opening Tool, slide the tool under the skid plate and carefully lift it off the drone.

編集

手順3

DJI Mavic Air 2 Motherboard Replacement: 手順 3、 3の画像 3

Using the Phillips #000 screwdriver, remove the four screws holding the plastic cover and carefully remove it.

編集

手順4

DJI Mavic Air 2 Motherboard Replacement: 手順 4、 3の画像 3

With the motherboard exposed, use the Phillips #000 screwdriver to remove each screw on the face of the motherboard.
In addition, unplug all of the connectors attached to the motherboard.

編集