メインコンテンツにスキップ

DBPOWER T20 Speaker Replacement

必要な工具と部品

  1. DBPOWER T20 Speaker Replacement, DBPOWER T20 Disassembly: 手順 1、 1の画像 1
    • Flip the device and lay flat.

  2. DBPOWER T20 Speaker Replacement: 手順 2、 1の画像 1
    • Remove the four (9 mm) screws with a PH2 screwdriver.

    • Remove the two (7 mm) located with a PH2 screwdriver.

  3. DBPOWER T20 Speaker Replacement: 手順 3、 3の画像 1 DBPOWER T20 Speaker Replacement: 手順 3、 3の画像 2 DBPOWER T20 Speaker Replacement: 手順 3、 3の画像 3
    • Flip the device over and pry the top off with a plastic opening tool.

  4. DBPOWER T20 Speaker Replacement: 手順 4、 1の画像 1
    • Remove the ribbon cable connecting the motherboard to the button control board by gently pulling it from its connector.

  5. DBPOWER T20 Speaker Replacement: 手順 5、 2の画像 1 DBPOWER T20 Speaker Replacement: 手順 5、 2の画像 2
    • Remove four (6 mm) screws connecting the motherboard using a J0 screwdriver.

  6. DBPOWER T20 Speaker Replacement: 手順 6、 3の画像 1 DBPOWER T20 Speaker Replacement: 手順 6、 3の画像 2 DBPOWER T20 Speaker Replacement: 手順 6、 3の画像 3
    • Remove the two cables connected to the motherboard: black power cable and the red/black fan cable.

    • the black cable requires more force to remove than the other cables.

  7. DBPOWER T20 Speaker Replacement: 手順 7、 2の画像 1 DBPOWER T20 Speaker Replacement: 手順 7、 2の画像 2
    • Lift the black latch on the ZIF connector and remove the ribbon cable that attaches the digitizer to the motherboard.

  8. DBPOWER T20 Speaker Replacement: 手順 8、 1の画像 1
    • Raise motherboard by lifting sideways and then up to avoid the ports.

  9. DBPOWER T20 Speaker Replacement: 手順 9、 2の画像 1 DBPOWER T20 Speaker Replacement: 手順 9、 2の画像 2
    • Remove wires attaching the piezoelectric speakers to the motherboard.

  10. DBPOWER T20 Speaker Replacement: 手順 10、 2の画像 1 DBPOWER T20 Speaker Replacement: 手順 10、 2の画像 2
    • Remove the five screws securing the black plastic cover with a J0 screwdriver.

    • Lift up and out to remove.

  11. DBPOWER T20 Speaker Replacement, Speaker: 手順 11、 2の画像 1 DBPOWER T20 Speaker Replacement, Speaker: 手順 11、 2の画像 2
    • Remove the two (3 mm) screws connecting the bracket down and pull out the reflector, using a J0 Philips Head Screwdriver.

  12. DBPOWER T20 Speaker Replacement: 手順 12、 3の画像 1 DBPOWER T20 Speaker Replacement: 手順 12、 3の画像 2 DBPOWER T20 Speaker Replacement: 手順 12、 3の画像 3
    • Slide the mirror straight up to remove.

  13. DBPOWER T20 Speaker Replacement: 手順 13、 3の画像 1 DBPOWER T20 Speaker Replacement: 手順 13、 3の画像 2 DBPOWER T20 Speaker Replacement: 手順 13、 3の画像 3
    • Slide out the power source and disconnect its cables from the power jack and the light.

  14. DBPOWER T20 Speaker Replacement: 手順 14、 3の画像 1 DBPOWER T20 Speaker Replacement: 手順 14、 3の画像 2 DBPOWER T20 Speaker Replacement: 手順 14、 3の画像 3
    • Remove the screws holding down the first speaker with a J0 screwdriver.

    • Remove the screws holding down the second speaker down.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Ryan Goldin

メンバー登録日: 02/15/18

245 ポイント

1ガイドが承認済み

チーム

USF Tampa, Team S16-G2, Boczar Spring 2018 USF Tampa, Team S16-G2, Boczar Spring 2018人のメンバー

USFT-BOCZAR-S18S16G2

5 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 4

今までの合計 421