メインコンテンツにスキップ

D-Link DIR-890L Heat Sink Replacement

必要な工具と部品

  1. D-Link DIR-890L Heat Sink Replacement, Case: 手順 1、 3の画像 1 D-Link DIR-890L Heat Sink Replacement, Case: 手順 1、 3の画像 2 D-Link DIR-890L Heat Sink Replacement, Case: 手順 1、 3の画像 3
    • Peel off the four rubber rectangular feet with your fingers.

    • The feet may be hard to remove. Apply additional force if necessary.

  2. D-Link DIR-890L Heat Sink Replacement: 手順 2、 3の画像 1 D-Link DIR-890L Heat Sink Replacement: 手順 2、 3の画像 2 D-Link DIR-890L Heat Sink Replacement: 手順 2、 3の画像 3
    • Unscrew the 5mm screws in each corner using the Phillips #1 screwdriver.

  3. D-Link DIR-890L Heat Sink Replacement: 手順 3、 3の画像 1 D-Link DIR-890L Heat Sink Replacement: 手順 3、 3の画像 2 D-Link DIR-890L Heat Sink Replacement: 手順 3、 3の画像 3
    • Wedge the opening tool between the red top panel and the gray bottom panel.

    • Twist the opening tool to separate the panels. Work your way around the case until both of the panels are separated.

  4. D-Link DIR-890L Heat Sink Replacement, Heat Sink: 手順 4、 3の画像 1 D-Link DIR-890L Heat Sink Replacement, Heat Sink: 手順 4、 3の画像 2 D-Link DIR-890L Heat Sink Replacement, Heat Sink: 手順 4、 3の画像 3
    • Unscrew the two 7mm screws with a Phillips #1 screwdriver.

    • Lift the heat sink off the metal plate with your fingers.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Michael Hilomen

メンバー登録日: 10/06/16

201 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 10-7, Livingston Fall 2016 Cal Poly, Team 10-7, Livingston Fall 2016人のメンバー

CPSU-LIVINGSTON-F16S10G7

4 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 7

過去 30 日: 11

今までの合計 1,183