メインコンテンツにスキップ

はじめに

Did the back casing of your Wi-Fi Baby Camera crack? The answer to fixing and replacing that is in this guide.

  1. Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.
    • Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.

  2. Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.
    • Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.

  3. Replace your accent ring with whichever color you choose.
    • Replace your accent ring with whichever color you choose.

  4. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  5. Take your Phillips Head screwdriver, with a long neck, and unscrew the two screws - one in each hole on either side of the outer exposed camera lens. Take your Phillips Head screwdriver, with a long neck, and unscrew the two screws - one in each hole on either side of the outer exposed camera lens.
    • Take your Phillips Head screwdriver, with a long neck, and unscrew the two screws - one in each hole on either side of the outer exposed camera lens.

  6. Pull the WiFi Baby Camera open. It should be easily done after the screws are removed. It should be easily done after the screws are removed.
    • Pull the WiFi Baby Camera open.

    • It should be easily done after the screws are removed.

  7. Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire. Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.
    • Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.

  8. Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in. Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in. Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.
    • Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.

まとめ

To reassemble your device, follow these instructions in reverse order.

April Ulrich

メンバー登録日: 2018年10月09日

205 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team S1-G5, Leahy Fall 2018 USF Tampa, Team S1-G5, Leahy Fall 2018人のメンバー

USFT-LEAHY-F18S1G5

4 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 9

今までの合計 70