はじめに

Use this guide to assist with general disassembly or troubleshooting of your braille display.

パーツ

パーツは必要ありません。

Remove the four bottom screws with a Phillips #00 screwdriver. Remove the four bottom screws with a Phillips #00 screwdriver.
  • Remove the four bottom screws with a Phillips #00 screwdriver.

コメントを追加する

Remove the plastic cover, paper and chipset. Remove the plastic cover, paper and chipset. Remove the plastic cover, paper and chipset.
  • Remove the plastic cover, paper and chipset.

コメントを追加する

Remove the two screws with a Phillips #00 screwdriver on the logic board. take out the main circuit like show in the picture take out the main circuit like show in the picture
  • Remove the two screws with a Phillips #00 screwdriver on the logic board.

  • take out the main circuit like show in the picture

コメントを追加する

Remove the four screws with a Phillips #00 screwdriver. Remove the four screws with a Phillips #00 screwdriver. Remove the four screws with a Phillips #00 screwdriver.
  • Remove the four screws with a Phillips #00 screwdriver.

コメントを追加する

Remove the connector delicately. Remove the connector delicately. Remove the connector delicately.
  • Remove the connector delicately.

コメントを追加する

when you put it back together make sure mechanical cells are connected correctly when you put it back together make sure mechanical cells are connected correctly
  • when you put it back together make sure mechanical cells are connected correctly

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Sisyphe

メンバー登録日: 2013年07月29日

332 ポイント

2のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 430