Cuisinart TOA-60FR Power Cord Replacement

はじめに

If you are having trouble turning on your Cuisinart TOA-60Fr, it could be the power cord. The steps in this guide will walk you through the process of replacing the power cord. This does necessitate some wire stripping ability as well as knowledge of hot and natural electoral wire.

必要な工具と部品

手順1 Outside removal

Cuisinart TOA-60FR Power Cord Replacement, Outside removal: 手順 1、 1の画像 1

Using a 25-hexagon head, unscrew these 7.31 mm three screws.

編集

手順2

Using a Phillips #1 screwdriver, remove all these 7.31 mm screws.
Pull off the back.

編集

手順3

Cuisinart TOA-60FR Power Cord Replacement: 手順 3、 3の画像 3

Flip the oven upside down.
Pick the grey stoppers out with a sprudger.
Using a Phillips #1 screwdriver, remove these three 11 mm screws.

編集

手順4

Unscrew all of the 11.05 mm screws that connect the outer shell to the device.

編集

手順5

Cuisinart TOA-60FR Power Cord Replacement: 手順 5、 3の画像 3

Pull the top piece off.
Push down before pulling up to release the tabs.

編集

手順6 Power Cord

Cuisinart TOA-60FR Power Cord Replacement, Power Cord: 手順 6、 1の画像 1

Take the needle nose pliers and cut off the crimped-on-wire connectors.
Pressed down hard. These wires are thick.
These are crimped on wire conncetors so they can not be twisted off. The only way to remove them is by cutting off the wire.

編集

手順7

Cuisinart TOA-60FR Power Cord Replacement: 手順 7、 3の画像 3

Strip the wires back with wire strippers. Or carefully take the needle nose pliers and cut gently to only make a mark on the jacket and not the wires. Then pull with the pliers to remove the jacket.

編集