メインコンテンツにスキップ

Cuisinart Mini-Prep DLC-2A Motor Replacement

必要な工具と部品

  1. Cuisinart Mini-Prep DLC-2A Motor Replacement, Cuisinart Mini-Prep DLC-2A Case Disassembly: 手順 1、 2の画像 1 Cuisinart Mini-Prep DLC-2A Motor Replacement, Cuisinart Mini-Prep DLC-2A Case Disassembly: 手順 1、 2の画像 2
    • Remove the back panel using a Phillips #1 Screwdriver on the four screws that hold it in place.

  2. Cuisinart Mini-Prep DLC-2A Motor Replacement, Motor: 手順 2、 3の画像 1 Cuisinart Mini-Prep DLC-2A Motor Replacement, Motor: 手順 2、 3の画像 2 Cuisinart Mini-Prep DLC-2A Motor Replacement, Motor: 手順 2、 3の画像 3
    • Remove the three screws that hold the motor to the top case using a Phillips #1 screwdriver.

  3. Cuisinart Mini-Prep DLC-2A Motor Replacement: 手順 3、 3の画像 1 Cuisinart Mini-Prep DLC-2A Motor Replacement: 手順 3、 3の画像 2 Cuisinart Mini-Prep DLC-2A Motor Replacement: 手順 3、 3の画像 3
    • Pull out the metal piece from the casing.

    • Pull apart the plastic casing that contains the rod.

    • Take off the plastic gears.

  4. Cuisinart Mini-Prep DLC-2A Motor Replacement: 手順 4、 2の画像 1 Cuisinart Mini-Prep DLC-2A Motor Replacement: 手順 4、 2の画像 2
    • Use the Phillips #1 screwdriver to take off the screws that hold the white plastic to the metal piece.

    • Pull apart the white plastic from the metal piece.

  5. Cuisinart Mini-Prep DLC-2A Motor Replacement: 手順 5、 1の画像 1
    • Use an electric screwdriver with a Phillips #1 head to take off the top metal piece.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Eduardo Torres

メンバー登録日: 09/25/17

138 ポイント

1ガイドが承認済み

チーム

University of North Texas, Team S3-G1, Thompson Fall 2017 University of North Texas, Team S3-G1, Thompson Fall 2017人のメンバー

UNT-THOMPSON-F17S3G1

3 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 6

過去 30 日: 13

今までの合計 689