メインコンテンツにスキップ

Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement

必要な工具と部品

  1. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: 手順 1、 3の画像 1 Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: 手順 1、 3の画像 2 Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: 手順 1、 3の画像 3
    • Orient the crock pot where the lid locked and unlocked icons are visible.

    • Grasp the handle firmly and turn the lid clockwise until the arrow and the lid unlocked icon are facing each other.

    • Remove the lid.

  2. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Bobber Valve: 手順 2、 1の画像 1
    • Flip the lid over and expose plastic washer.

  3. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement: 手順 3、 1の画像 1
    • Pull the plastic washer off the bobber valve and allow the bobber valve to fall out

終わりに

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

William Kelly

メンバー登録日: 09/24/18

745 ポイント

7のガイドは作成済み

7 件のコメント

Ok I followed your directions but the new valve just keeps calling out?

dpataky1952 - 返信

First time I used this but the bobber valve ports steam and does not stop ( unit is brand new )

Archerkc - 返信

would be nice to see the other side of this. is it just supposed to be a hole on the outside up top? it is letting out air…when im trying to pressure cook.

shaycooks2 - 返信

Ditto I was wanting to know the same thing!

kate2272 -

Ditto. Mine does the same thing.. suggestions?

Tina Royce - 返信

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 22

過去 30 日: 132

今までの合計 26,354