修理を始めるには コミュニティ ストア

Craftsman Model 315.10721 Cord Replacement

はじめに

WARNING: Once the power cord has been identified as the item that needs replacement, make sure that the device is disconnected from any power supply.

必要な工具と部品

  1. Craftsman Model 315.10721 Cord Replacement, Cord: 手順 1、 1の画像 1

    • Remove the two 1" Phillips screws using a #1 Phillips screwdriver.

    • Remove the three 1/2" Phillips screws using a #1 Phillips screwdriver.

    • Once the five screws are removed, lift the handle cover from the saw.

    • Each screw has a corresponding nut on the opposite side of the power saw

    翻訳

  3. Craftsman Model 315.10721 Cord Replacement: 手順 2、 1の画像 1

    • Remove the 1/2" Phillips screw that is securing the switch using a Phillips #1 screwdriver.

    翻訳

  4. Craftsman Model 315.10721 Cord Replacement: 手順 3、 2の画像 1 Craftsman Model 315.10721 Cord Replacement: 手順 3、 2の画像 2

    • Using a Phillips #00 screwdriver or a small diameter screwdriver, gently insert it into the leads. When the screwdriver is inserted into the lead, it will release the wire.

    • The leads are where the black and white wires from the power cord are plugged in.

    • Release both the black and white wires and gently pull them from the leads.

    • To install the new cord, insert the wires of the new cord in the same way that they were removed.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Riley Hilliker

メンバー登録日: 10/14/14

557 ポイント

5のガイドは作成済み

バッジ: 11

+8 個以上のバッジ

チーム

Cal Poly, Team 4-47, Amido Fall 2014 Cal Poly, Team 4-47, Amido Fall 2014人のメンバー

CPSU-AMIDO-F14S4G47

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 473