Craftsman Model 315.10721 Brush Replacement

はじめに

Often times it is only necessary to replace the carbon brushes, not the motor. Carbon brushes experience a lot of friction, and replacement is generally expected over time. Ensure your saw is unplugged before beginning the repair

必要な工具と部品

手順1 Brush

Craftsman Model 315.10721 Brush Replacement, Brush: 手順 1、 2の画像 1

Craftsman Model 315.10721 Brush Replacement, Brush: 手順 1、 2の画像 2

Using a flathead screwdriver, remove the brush caps on the outer casing of the saw near the motor.

翻訳

手順2

Using a Phillips #00 screwdriver or a small diameter nail, carefully pull out the washer.
The washer is seurely held in place and may require force to remove

翻訳

手順3

After the washers are removed, gently grab the old brushes and remove them from the motor.
When reassembling make sure the curvature of the brushes match curvature of the motor.

翻訳