はじめに

Is your Cosori TurboBlaze not properly heating your food? Is it not displaying the correct temperature on your control panel's display? If this is the case, then you can fix this issue with the replacement of your control panel's microprocessor inside the the main circuit board.

必要な工具と部品

手順1 Control Panel

Cosori TurboBlaze Control Panel Replacement, Control Panel: 手順 1、 1の画像 1

Use an iFixit opening tool to pry open the top lid of your air fryer.

編集

手順2

Detach the white wire harness bundle from the main device.

編集

手順3

Gently push each small translucent button inward.
This will help you detach the control panel from the bottom section of the lid.
Pull the white wire harness through.

編集

手順4

Remove the bottom panel of the lid.

編集

手順5

Remove four 1.2 mm screws from the control panel using a Phillips #1 screwdriver.

編集

手順6

Flip the circuit board over to its backside to access the input controls.
If any input controls show signs of wear, cuts, or bends, then they must be replaced.

編集