メインコンテンツにスキップ

はじめに

Did you spill coffee or any other liquid on your Corsair K65? Or do you just need to open up the keyboard to access the interior? This guide will teach you how to do either one of those!

  1. Unplug your keyboard. The wire is located near the back and on the bottom of the keyboard. Place your keyboard onto a workspace with plenty of room. Place your keyboard onto a workspace with plenty of room.
    • Unplug your keyboard. The wire is located near the back and on the bottom of the keyboard.

    • Place your keyboard onto a workspace with plenty of room.

  2. Pry each keycap off by grabbing the keycap with your fingers and pulling directly up. Pulling the keycaps off at an angle may damage the keys or the switches on the keyboard.
    • Pry each keycap off by grabbing the keycap with your fingers and pulling directly up.

    • Pulling the keycaps off at an angle may damage the keys or the switches on the keyboard.

    • A specialized tool to remove the keycaps will make this process a lot easier and faster, but is not required.

  3. Unscrew the exposed 9mm Phillips #0  screws with your mini Phillips #0 screwdriver. There should be 17 exposed screws in total. There should be 17 exposed screws in total.
    • Unscrew the exposed 9mm Phillips #0 screws with your mini Phillips #0 screwdriver.

    • There should be 17 exposed screws in total.

  4. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  5. Peel back the Corsair logo with a knife. Remove the logo, exposing another 9mm Phillips #0 screw.
    • Peel back the Corsair logo with a knife.

    • Remove the logo, exposing another 9mm Phillips #0 screw.

  6. Unscrew the now exposed 9mm Phillips #0 screw. There should now be a total of 18 9mm Phillips #0 screws.
    • Unscrew the now exposed 9mm Phillips #0 screw.

    • There should now be a total of 18 9mm Phillips #0 screws.

  7. Carefully separate the bottom half of the keyboard from the top half of the keyboard. Carefully separate the bottom half of the keyboard from the top half of the keyboard.
    • Carefully separate the bottom half of the keyboard from the top half of the keyboard.

  8. Apply the rubbing alcohol to your cotton pad. Apply the rubbing alcohol to your cotton pad.
    • Apply the rubbing alcohol to your cotton pad.

  9. Wipe down the affected parts of the keyboard interior with the alcohol-soaked pad.
    • Wipe down the affected parts of the keyboard interior with the alcohol-soaked pad.

    • Allow the interior of the keyboard to dry for a few minutes before reassembling the keyboard.

まとめ

To reassemble your device, follow these instructions in reverse order.

17 の人々がこのガイドを完成させました。

Michael Le

メンバー登録日: 2015年09月29日

541 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 14-5, Green Fall 2015 Cal Poly, Team 14-5, Green Fall 2015人のメンバー

CPSU-GREEN-F15S14G5

4 メンバー

4のガイドは作成済み

キーボードの中に液体が入ってしまい、どうしようかと困っていたところこちらのサイトに辿り着きました。

丁寧な説明のお陰で無事、拭き取ることが出来ました。本当に有難うございました。

kumashikota - 返信

useless guide. buttons cant be cleaned

Robert Lipowski (robdevilXI) - 返信

broke the white and blue connector, no way to get the board in the same orientation as you did.

qwuzzy - 返信

Extremely bad guide. Doesn’t go over how the switch to change the LEDs need to be carefully moved away or it will snap. I can’t imagine how many people you’ve costed a keyboard. 0/5 stars.

ah93493 - 返信

コメントを追加する

統計データを表示:

過去 24時間: 14

過去 7 日: 139

過去 30 日: 536

今までの合計 15,572