メインコンテンツにスキップ

Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement

必要な工具と部品

  1. Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement, Unplug: 手順 1、 1の画像 1
    • Before you begin, remember to disconnect the mains plug.

  2. Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 手順 2、 2の画像 1 Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 手順 2、 2の画像 2
    • Unscrew the screws of the hull to open it.

  3. Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 手順 3、 3の画像 1 Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 手順 3、 3の画像 2 Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 手順 3、 3の画像 3
    • Using a screwdriver, unscrew the place where the carbon is located in order to extract it.

  4. Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 手順 4、 1の画像 1
    • Take the carbon out of the carbon holder.

    • With pliers disconnect the carbon.

    • Then reconnect the new carbon.

    • Replace it in the carbon holder.

  5. Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 手順 8、 1の画像 1
    • And finally put it back in its housing.

  6. Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 手順 9、 2の画像 1 Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 手順 9、 2の画像 2
    • Before closing, check that no cable is blocked and that each part is in its place.

    • Then retighten the hull screws.

終わりに

To reassemble perform steps in reverse.

以下の翻訳者の皆さんにお礼を申し上げます:

fr en

100%

HelloMacOSさんは世界中で修理する私たちを助けてくれています! あなたも貢献してみませんか?
翻訳を始める ›

作成者

1人の作成者と共同作成されました。

Céline Chemineau

メンバー登録日: 01/29/20

16,581 ポイント

95のガイドは作成済み

チーム

Leroy Merlin Leroy Merlin人のメンバー

Community

36 メンバー

239のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 9

今までの合計 369