Conair Instant Heat Curling Wand CD778CS Power Cord Replacement

はじめに

This guide will walk the user through replacing the power cord in their Conair Curling Wand. The most common problem this device encounters is power cord failure which does not enable the wand to heat up. This guide is moderately easy and the most difficult part is opening up the device.

必要な工具と部品

手順1 Power Cord

Conair Instant Heat Curling Wand CD778CS Power Cord Replacement, Power Cord: 手順 1、 1の画像 1

Remove 2 mm screw with a Phillips #0 screwdriver.
Make sure curling wand is unplugged and cooled before beginning.

翻訳

手順2

Remove the next 4 mm screw with a Phillips #0 screwdriver.

翻訳

手順3

Use a flat head screwdriver to assist in prying open the plastic housing.

翻訳

手順4

Gently open the plastic housing making sure to evenly pull apart the plastic so it does not bend or snap.

翻訳

手順5

Remove the plastic ring on the bottom of the curling iron by wiggling back and forth and pulling down.
Use your flat head screwdriver for assistance if the plastic housing is firmly in place and does not move.

翻訳