メインコンテンツにスキップ

はじめに

If your hair dryer's fan grill is damaged or dirty, this guide will show you how to replace it.

パーツ

パーツは指定されていません。

  1. Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.
    • Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

    • Hold the hair dryer by the handle so that the back panel faces up.

  2. Remove the two 15.875 mm Phillips #2 screws from the back panel. Remove the two 15.875 mm Phillips #2 screws from the back panel.
    • Remove the two 15.875 mm Phillips #2 screws from the back panel.

  3. Starting from where the cord attaches to the handle, pull apart the two plastic panels. Continue separating the back panel, working along the seam. With moderate force, completely remove the back panel from the hair dryer.
    • Starting from where the cord attaches to the handle, pull apart the two plastic panels.

    • Continue separating the back panel, working along the seam.

    • With moderate force, completely remove the back panel from the hair dryer.

  4. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  5. Hold the hair dryer by the nozzle so that the handle points to the left. Remove the two 1-inch Phillips #2 screws from the back of the fan motor.
    • Hold the hair dryer by the nozzle so that the handle points to the left.

    • Remove the two 1-inch Phillips #2 screws from the back of the fan motor.

  6. Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns. Pull on the back of the fan motor to gently lift the motor out of the hair dryer. Lift the attached electrical wiring and heat shield completely out of the hair dryer.
    • Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns.

    • Pull on the back of the fan motor to gently lift the motor out of the hair dryer.

    • Lift the attached electrical wiring and heat shield completely out of the hair dryer.

  7. Hold the front panel of the hair dryer by the nozzle facing upward.
    • Hold the front panel of the hair dryer by the nozzle facing upward.

  8. Using your index finger push the fan grill down with moderate force. Using your index finger push the fan grill down with moderate force.
    • Using your index finger push the fan grill down with moderate force.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Timothy Lo

メンバー登録日: 2014年04月22日

917 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 10-58, Amido Spring 2014 Cal Poly, Team 10-58, Amido Spring 2014人のメンバー

CPSU-AMIDO-S14S10G58

4 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 7

今までの合計 679