はじめに
This guide will show how to replace the barrel heating element of your Conair Infiniti PRO Curling Iron. It requires the housing, power cord and motherboard to be removed beforehand.
必要な工具と部品
-
-
-
Heat up your soldering gun and desolder the red wire from the motherboard as shown.
-
-
この手順で使用する道具:Desoldering Pump$3.99
-
With your soldering gun, desolder the white wire from the motherboard as shown.
-
-
-
Remove the heating element mount. This will free up the heating element barrel for replacement.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
3 の人々がこのガイドを完成させました。