Skip to main content

はじめに

If your dryer isn't turning on, the back of the On/Off button that engages the power may be broken.

パーツ

パーツは指定されていません。

  1. Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer. Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.
    • Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.

  2. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  3. Some pieces may fall out when removing the face of the handle.
    • Some pieces may fall out when removing the face of the handle.

    • Once you have taken the screws out, take the top half of the handle off by lifting it off of the dryer.

  4. Now take out the On/Off switch by gently pulling it out towards you and lightly pushing it to the right with your finger until it comes out of the groove it is resting in. Once the new switch is in place you can put the dryer back together.
    • Now take out the On/Off switch by gently pulling it out towards you and lightly pushing it to the right with your finger until it comes out of the groove it is resting in.

    • Once the new switch is in place you can put the dryer back together.

まとめ

To reassemble your device, follow these instructions in reverse order.

Candace

メンバー登録日: 2014年01月23日

884 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 10-33, Maness Winter 2014 Cal Poly, Team 10-33, Maness Winter 2014人のメンバー

CPSU-MANESS-W14S10G33

3 メンバー

7のガイドは作成済み

Looks to me that a replacement switch would be required. How can obtain one?

Jaky Felix - 返信

“No parts required” is what’s displayed by default when there’s no link to an actual part for sale—it’’s a bit silly and clearly incorrect in this case. For hard-to-find parts, check eBay or Amazon. Also, a lot of folks with multiple broken units use these guides to cobble together one working unit from the parts. Good luck!

Jeff Suovanen -

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 12

今までの合計 1,787