メインコンテンツにスキップ

Computer King Muffin Kinder 7 Screen Replacement

必要な工具と部品

  1. Computer King Muffin Kinder 7 Screen Replacement, Screen: 手順 1、 2の画像 1 Computer King Muffin Kinder 7 Screen Replacement, Screen: 手順 1、 2の画像 2
    • Use the plastic opening tool help push out the microSD card from the microSD slot.

  2. Computer King Muffin Kinder 7 Screen Replacement: 手順 2、 1の画像 1
    • Use the plastic opening tool to unclip the plastic front from the plastic back. Use the MicroSD slot to initially start the unclipping.

  3. Computer King Muffin Kinder 7 Screen Replacement: 手順 3、 2の画像 1 Computer King Muffin Kinder 7 Screen Replacement: 手順 3、 2の画像 2
    • Unscrew the nine 3.0 mm Phillips #00 screws.

  4. Computer King Muffin Kinder 7 Screen Replacement: 手順 4、 1の画像 1
    • The battery is glued onto the black plastic. Use the plastic opening tool to pry the battery from the black plastic

  5. Computer King Muffin Kinder 7 Screen Replacement: 手順 5、 2の画像 1 Computer King Muffin Kinder 7 Screen Replacement: 手順 5、 2の画像 2
    • There will be a black strip connected to the screen.

    • Use the pointy end of the spudger to unstick the black strip that is glued onto the screen.

  6. Computer King Muffin Kinder 7 Screen Replacement: 手順 6、 3の画像 1 Computer King Muffin Kinder 7 Screen Replacement: 手順 6、 3の画像 2 Computer King Muffin Kinder 7 Screen Replacement: 手順 6、 3の画像 3
    • You will need to remove 2 ribbon cables, one that is connected to the touch screen (by the battery) and one that is connected to the yellow plastic (by the speaker).

    • Use the flat end of the spudger to lift the black panel covering the ribbon cables.

  7. Computer King Muffin Kinder 7 Screen Replacement: 手順 7、 1の画像 1
    • Pull the two ribbon cables out so that they are no longer connected to the logic board.

  8. Computer King Muffin Kinder 7 Screen Replacement: 手順 8、 1の画像 1
    • Lift up the logic board and black plastic so that they are no longer covering the screen

    • Lift out the screen.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Katherine

メンバー登録日: 01/22/15

439 ポイント

3のガイドは作成済み

チーム

UWT Liner: Group 2 UWT Liner: Group 2人のメンバー

Community

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 6

今までの合計 359