メインコンテンツにスキップ

Compaq iPAQ Pocket PC 3830 Speaker Replacement

必要な工具と部品

  1. Compaq iPAQ Pocket PC 3830 Speaker Replacement, Speaker: 手順 1、 2の画像 1 Compaq iPAQ Pocket PC 3830 Speaker Replacement, Speaker: 手順 1、 2の画像 2
    • Remove the four 0.8mm Phillips # 00 screws from the back board using the screwdriver from your tool kit.

  2. Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 2、 2の画像 1 Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 2、 2の画像 2
    • Once the backboard is removed, remove the four screws on the motherboard. Two on top of the motherboard and two on the bottom of the motherboard using the Phillips screwdriver.

  3. Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 3、 1の画像 1
    • Detach the two pairs of wires, found on the top right of the motherboard, from their combs using the tweezers from the toolkit.

  4. Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 4、 2の画像 1 Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 4、 2の画像 2
    • In order to get to the speaker, try to free the motherboard by removing all the wires from their combs using the tweezers.

  5. Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 5、 2の画像 1 Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 5、 2の画像 2
    • Use tweezers to remove wires from combs.

  6. Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 6、 1の画像 1
    • Use your tweezers to free wire from comb in order to free the motherboard.

  7. Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 7、 1の画像 1
    • Once you have all the wires freed from the combs, you can detach the motherboard just by lifting it out of place.

  8. Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 8、 3の画像 1 Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 8、 3の画像 2 Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 8、 3の画像 3
    • Unscrew the two Phillips #00 screws to get the speaker loose using a Phillips screwdriver. The screws measure 0.3 mm in length.

  9. Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 9、 2の画像 1 Compaq iPAQ Pocket PC 3830 Speaker Replacement: 手順 9、 2の画像 2
    • Once the two screws that hold the speaker in place are removed, remove the speaker using tweezers.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Sedina Cavcic

メンバー登録日: 09/05/14

464 ポイント

3のガイドは作成済み

チーム

USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014 USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014人のメンバー

USFSM-STEWART-F14S1G1

3 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 330