Compaq Presario CQ62 Motherboard Replacement

はじめに

This is a motherboard replacement guide for the Compaq Presario CQ62. The following guide gives step by step instructions on how to remove and replace your motherboard. The mother board is a vital piece of technology in this device that allows the CPU, RAM, and a sum of other hardware components to communicate with each other.

必要な工具と部品

手順1 Motherboard

Compaq Presario CQ62 Motherboard Replacement, Motherboard: 手順 1、 1の画像 1

Turn the computer over as shown in the image.
Remove the two M2.5x5 screws that secure the cover of the hard drive.

翻訳

手順2

Remove the hard drive by carefully pushing upwards on the metal supports.
When free, carefully release the hard drive's connector.

翻訳

手順3

Compaq Presario CQ62 Motherboard Replacement: 手順 3、 3の画像 3

Unscrew the two screws securing the lid for WLAN & RAM.
Remove the screw holding the WLAN module in place.
Release the two RF connectors on the WLAN module.

翻訳

手順4

Lift up on the WLAN module to forty-five degrees, and gently pull it out.

翻訳

手順5

Remove the thirteen bottom screws.
Remove the screws holding in the keyboard.

翻訳

手順6

To remove the keyboard, use the spudger to release the snaps between the casing and the keyboard top. Remove the snaps all the way around the device except around the LDC area.
Using a spudger, firmly press the keyboard from the function keys downward towards the bottom of the keyboard to remove the board.

翻訳

手順7

Compaq Presario CQ62 Motherboard Replacement: 手順 7、 3の画像 3

When pressing down on the keyboard, make sure to use enough force to overcome the adhesive.
When lifting out the keyboard be mindful of the keyboard's flex cables that need to be disconnected when the keyboard is loose.
Remove the flex cables by opening the connectors and removing them (there are 5 in total).
Remove the three screws.
Remove the top cover with a spudger.