はじめに

This guide will detail how to replace the RAM in a CQ60-211DX.

パーツ

パーツは必要ありません。

  1. Power off the CQ60 and unplug all cables connected to it.
    • Power off the CQ60 and unplug all cables connected to it.

  2. Using a standard #2 Phillips-head screwdriver, remove the back compartment of the CQ60 to access the motherboard.
    • Using a standard #2 Phillips-head screwdriver, remove the back compartment of the CQ60 to access the motherboard.

    • Use your fingers to push the retention clips away from the RAM sticks, and carefully pull out the old RAM.

    • Carefully insert the new RAM, and ensure that it is placed in the correct slots.

まとめ

To reassemble your device, follow these instructions in reverse order.

Garrett Carter

メンバー登録日: 2018年09月21日

471 ポイント

4のガイドは作成済み

チーム

University of North Texas, Team S2-G3, Riccardelli Fall 2018 University of North Texas, Team S2-G3, Riccardelli Fall 2018人のメンバー

UNT-RICCARDELLI-F18S2G3

4 メンバー

4のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 33

今までの合計 77