メインコンテンツにスキップ

はじめに

You will need to assemble the proper tools shown in the first step of this guide before you continue forward.

This guide is meant to assist the reader with the proper steps to remove and replace the touchpad of the Compaq Evo N1000v device.

パーツ

パーツは指定されていません。

  1. Remove the 6 screws as shown in the photo.
    • Remove the 6 screws as shown in the photo.

  2. Push the front of the laptop upwards as the photo shows.
    • Push the front of the laptop upwards as the photo shows.

  3. Rest the front end piece on the keyboard area.
    • Rest the front end piece on the keyboard area.

  4. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  5. Unscrew the 4 screws as shown in the photo.
    • Unscrew the 4 screws as shown in the photo.

  6. Unplug the cable as shown in the photo.
    • Unplug the cable as shown in the photo.

  7. Unlock the second cable shown in the photo by using the pointed tweezers to move the lock upward on both sides of the cable.
    • Unlock the second cable shown in the photo by using the pointed tweezers to move the lock upward on both sides of the cable.

  8. Unplug the cable you have just unlocked.
    • Unplug the cable you have just unlocked.

  9. Remove the gray, metal case surrounding the touchpad.
    • Remove the gray, metal case surrounding the touchpad.

  10. Remove the touchpad.
    • Remove the touchpad.

    • Repeat these steps in reverse order to install the new touchpad.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

ryan

メンバー登録日: 2014年03月12日

470 ポイント

2のガイドは作成済み

チーム

University of Maryland, Team 2-1, Vijaybhaskar Spring 2014 University of Maryland, Team 2-1, Vijaybhaskar Spring 2014人のメンバー

UMD-VIJAYBHASKAR-S14S2G1

3 メンバー

2のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 204