Cleaning the Skullcandy Mix Master DJ Adjustment Slider

はじめに

If you are having trouble adjusting the headband on your Skullcandy Mix Master DJ headphones, you may need to simply clean the slider tracks to remove any obstructions. This guide will show you how to that in just four few easy steps.

必要な工具と部品

手順1 Cleaning the Skullcandy Mix Master DJ Adjustment Slider

Cleaning the Skullcandy Mix Master DJ Adjustment Slider, Cleaning the Skullcandy Mix Master DJ Adjustment Slider: 手順 1、 1の画像 1

Remove the Skullcandy Mix Master DJ Headphones from any casing or protective gear.

編集

手順2

Rotate the headphones so that one of the speaker cups are facing you. Remove the four Phillips 3 mm screws along the headband cover.

編集

手順3

Gently remove the cover from the headband.
Removing the cover too fast could break the thin wire within the headband.

編集

手順4

Using a moist Q-tip or small towel, carefully wipe the inside of the headband sheath.
Be careful when cleaning to avoid damaging to the wire.
Do not use cleaning solvents. They may cause the plastic to break down.