はじめに
Follow this guide to remove the belt guide in order to replace it, or to access the belt and pulley.
必要な工具と部品
-
-
Disconnect the spark plug to prevent the engine from accidentally starting up during service:
-
Grab the plastic housing at the end of the spark plug wire.
-
Pull firmly to disconnect the wire from the spark plug.
-
-
-
-
Push down on the main handle to tilt the over seeder back on its rear wheels.
-
Place some weights on the handle, or tie the handle down, to prevent the machine from falling forward.
-
-
-
Remove the four lock nuts securing the belt guard:
-
Two 1/2" lock nuts
-
Two 7/16" lock nuts
-
もう少しです！
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
